ATK remanufactured
engine limited warranty ATK warrants to the original purchaser
that each engine sold by New York Block Exchange
shall be free of defects in material ~ and workmanship under normal
use and with periodical
maintenance as set forth by the original manufacturer subject to the following terms and conditions: Definitions: Engine: As used in this warranty refers to the remanufactured
assembly (basic block, cylinder head and internal components) as supplied
by ATK. Cylinder head: As used in the warranty refers to the remanufactured
cylinder head including those parts and accessories as supplied by
ATK. Term: Standard warranty: 3 years, unlimited miles. Please refer
to the label affixed to your owner’s manual for the standard warranty
term of your engine. The information on the label applies only to the
term of the warranty; all other terms and limitations of the warranty
are as follows. Warranty term begins on date of installation. The standard
warranty applies to all ATK products with the following exceptions: European, Diesel and Rotary engines carry a warranty term
of 12 months or 12,000 miles whichever occurs first. Cylinder Heads supplied separately carry a warranty term
of 12 months or 12,000 miles whichever occurs first. Turbochargers supplied separately carry a warranty term of
12 months or 12,000 miles whichever occurs first. Motorhomes:
Class A or Motorhomes over 11,000 GVW are
NOT covered by the ATK warranty. ATK expressly does not offer engines
for these applications. Please be aware that only engines designed
expressly for large motorhomes should ever be used in such an application. ATK
does not catalog nor prepare engines for these applications and therefore
takes no responsibility when an ATK engine is used in this manner. Marine: Engines cataloged and sold as marine engines are specially
prepared for this use and carry a warranty term of 12 months with a
replacement liability of $350.00. Engines used in marine applications
that are not cataloged carry a warranty term of 30 days with no provision
for labor claims. ATK does not recommend engines be used as marine
engines unless cataloged as such. Farm
and Lift Truck and Industrial applications: carry a warranty term of
12 months with a replacement liability of $350.00. Product replaced under
warranty: Product replaced under warranty carries the remainder of the original product’s
warranty term. Standards:
Subject to limitations listed herein. ATK, at its option, shall repair
or replace a product within the warranty term after determination by ATK
that the product is defective. All products
are to be returned to ATK for inspection. Products not returned to
ATK will not be warranted. All repairs and/or replacements covered
by this warranty must be authorized by ATK. Unauthorized repairs will not be paid. Limitations:
This warranty applies to products originally supplied by ATK. This
warranty does not apply to or include any of the following: A. Damage
as a result of overheating. Lack of lubrication or
contamination. B. Damage
resulting from pre-ignition or detonation. This includes but is not
limited to: melted or broken
pistons, broken piston rings, damaged cylinder heads, leaking head gaskets, etc. For more information regarding pre-ignition
and detonation please contact our customer
service department. C. Repair
or replacement required as a result of any accident or misuse. D. Repair
or replacement of any accessory or service item, including specifically
but not limited to: all
components of the cooling, fuel, electrical and ignition systems in addition to all
belts, hoses, and filters. E. Any
products used for competition, racing or related purposes. F. Any
product to which a device or accessory not conforming to original manufacturer’s specifications has
been installed. G. Any
products on which periodic maintenance services required by the original manufacturer have
not been performed. Limited Liability: ATK’s liability under this warranty is limited solely to
the repair or replacement of defective product. ATK shall not be liable for any incidental,
special, consequential or exemplary damages, including but not limited to rental cars,
towing fees or for any service not expressly provided for herein, relating to or
arising from the ATK product. Limited
Warranty: This warranty is given in lieu of all other warranties, expressed
or implied, including any warranty of merchantability, or fitness
for a particular purpose, on the part of ATK or the dealer installing the engine. No dealer
nor any agent or employee thereof, is authorized to extend or modify this warranty. Labor Payments: ATK authorized
repairs will be compensated at a rate not to exceed the Mitchell, Motor or Chilton repair manual’s published applicable flat rate schedule.Hourly rates for all authorized labor claims will be paid in accordance with the
original installation rate, not to exceed $42.00 per flat rate hour. Do it yourself repairs,
and repairs performed by unlicensed repair facilities, will be paid at a rate not to
exceed $15.00 per flat rate hour. Parts Payments: ATK authorized
repairs will have parts reimbursed at the original purchase price.
Proof of purchase may be required. Fluid and filter costs will be
reimbursed for the first 2,000 miles of service. Additional
owner/user obligations: Initial
startup: Valves must be readjusted to manufacturer’s specifications.
Due to various component
designs, cylinder head retorque may or may
not be required in your particular application. Refer to the factory shop manual for
the proper procedure for your engine type. If for any reason you are unsure what action
to take please contact our customer service department via our toll free telephone number.
First service between 600-1000
miles after installation: Oil and oil filter must be changed, valves
readjusted and cylinder heads retorqued (refer
to initial startup instructions). Warranty Transfer: The remaining
portion of the original ATK warranty in effect can be transferred with
the sale of the vehicle in which the engine was originally installed.
To transfer the warranty, please review the information in the owner’s manual. Failure
to perform these basic operations may result in a voided warranty. |